News | HMI

HMI NOW PART OF THE ANDRITZ GROUP OF COMPANIES

2018-11-16

A new chapter for HMI has been written on November 16th, 2018, when HMI has been formally acquired by Andritz Hydro Canada. After more than 60 years of existence and a recognized pan Canadian presence in the energy sector, this new acquisition by Andritz will open the door to [...]

ONTARIO POWER GENERATION (OPG) SELECTS HMI FOR ITS MANITOU AND CARIBOU PROJECT

2018-10-31

HMI has been awarded the contract for the design, supply, installation and commissioning of the spillways of both sites. The work on each spillway includes the replacement of 3 spillway gates, 3 hoists and the upgrade of the electrical system. The work at Manitou will span for summer [...]

ONTARIO POWER GENERATION (OPG) SELECTS HMI FOR ITS SILVER FALLS PROJECT

2018-10-23

OPG selects HMI for the replacement of the intake gate of its Silver Falls hydroelectric station, located near Thunder Bay, ON. This one year project should be completed in spring 2020 and includes the design, the fabrication, the installation and the commissioning of a new intake gate, including all [...]

BC HYDRO SELECTS HMI FOR PHASE 1 OF THE COQUITLAM REFURBISHMENT PROJECT

2018-07-31

As part of the development of the Coquitlam / Lower Buntzen tunnel refurbishment project, HMI has been selected as one of the proponents to propose its technical solution under a pre-engineering phase. Upon review by BC Hydro at the end of 2019, this proposed solution should lead towards [...]

FIRST MANDATE WITH OPG AT SIR ADAM BECK

2018-06-29

This first project for HMI with OPG, incudes the design, the fabrication and the delivery of a spare head gate at the Sir Adam Beck generating station located in Niagara Falls, ON. The spare gate will be delivered to OPG in early 2019

FORTISBC, WANETA STOPLOGS DESIGN AND SUPPLY

2018-05-01

As part of its continuous presence in the Kootenay region in British-Columbia, HMI has obtained the mandate to design and fabricate the new set of stoplogs for FortisBC’s Waneta GS. The stoplogs should be delivered by the end of 2018.

AFTER 22 YEARS OF CONTINUOUS PRESENCE, HMI COMPLETES ITS WORK AT THE BEAUHARNOIS GS

2017-05-01

HMI just completed its fifth and last phase of the work related to the rehabilitation of all the intake gates and hoists, as well as the rehabilitation of the draft tube gates of the Beauharnois GS, located in Quebec. The whole project will have spanned over a [...]